Picture of Testo 350 - Industrial Flue Gas Analyser
Picture of Testo 350 - Industrial Flue Gas Analyser Picture of Testo 350 - Industrial Flue Gas Analyser Picture of Testo 350 - Industrial Flue Gas Analyser
click images to zoom

Testo 350 - Industrial Flue Gas Analyser

Part number: 0632 3511

(As this instrument is configured to your application, please call our Technical Sales Team for more information on 01420 544 433 ext. 203, Quotations available upon request)
See below for full specifications and technical data
Manufacturer: Testo
Call for pricing
:


Share:

Description

Flue gas analysis – brilliantly easy: testo 350, the only one that thinks ahead

The portable flue gas analyser testo 350 is the ideal tool for professional flue gas analysis and measures up to six different parameters like O2, CO, COlow, NO, NOlow, NO2, SO2, CO2, CxHy and H2S. Helpful instrument settings guide safely through typical measurement tasks such as:

  • Flue gas analysis in commissioning, setting, optimisation or operational measurements on industrial burners, stationary industrial engines, gas turbines and flue gas purification systems.
  • Control and monitoring of officially prescribed emission limits in exhaust gas.
  • Function testing of stationary emission measuring instruments.
  • Control and monitoring of defined gas atmospheres in furnace rooms or kilns in different processes.


The Testo 350 meets MCERTS Performance Standards for Portable Emission Monitoring Systems -



Control Unit

Testo 350 flue gas analyser control unitThe control unit is the operating and display unit of the testo 350. It can be removed and carries out all settings. The presentation of the measurement values takes place via the large colour graphic display. Thanks to the internal memory, measurement data can be transferred from the analyser box to the control unit.

The advantages of the testo 350 control unit:

  • Operation of the analyser box and transfer of the measurement data even when the flue gas pipe and the adjustment site are separated, especially helpful for industrial burners, for example.
  • Measurement data can be transferred from the analyser box to the control unit. This means the analyser box can remain at the measurement site for further measurements, and the control unit taken away in order to process the measurement data.

The application-specific menu guides you through the menu and easy operation, without previous knowledge of the instrument, reduces work steps before the start of your measurements.

The following measurement objects are available:

  • Burner
  • Gas turbine
  • Engines (Select λ > 1 or λ ≤ 1 regulated industrial engines)
  • User-defined

Typical fuels, a practicable order of the exhaust gas parameters in the display, the corresponding calculations as well as useful instrument pre-settings, are stored under each of these measurement objects. The instrument diagnosis as well as warning reports in clear text inform of the current status of the flue gas analyser.


Analyser BoxTesto 350 Flue Gas Analyser Box

The analyser box contains up to 6 gas sensors, the pumps, the Peltier gas preparation (optional), filters, analysis and storage electronics as well as the mains unit and the Li-ion battery.

The robust housing has built-in impact protection, allowing the analyser box to be used in tough conditions. Downtimes due to dirt in the instrument are almost completely eliminated by intelligent design and robustness. Inherently sealed chambers protect the interior of the instrument from dirt from the surroundings. The analyser box can, after programming, independently carry out measurements and store measurement data.


Measurement range extensiontesto 350 flue gas analyser measurement

The automatic measurement range extension for unexpectedly high gas concentrations. In measurements on unfamiliar systems, or under less than ideal operating conditions, unexpectedly high emission values (e.g. CO concentrations up to 50,000 ppm) can occur. In these cases, the measurement range extension is automatically activated. This means maximum sensor life.


Easily accessible service opening

The service opening in the underside of the instrument allows very easy access to all relevant service and wearing parts such as pumps and filters, which can then be quickly cleaned and/or exchanged on site.

  • Reduction of instrument unavailability due to service times.
  • Cost savings due to instrument maintenance by the user.
  • Immediate access to all relevant wearing parts.


Easy exchange of the gas sensors

The gas sensors are pre-calibrated and can be exchanged, replaced or extended by further measurement parameters without test gas – if necessary directly on site.

  • No more long service times
  • Flexible extension of the testo 350 by further gas measurement parameters when applications or regulations change.
  • A report is immediately issued when the NO sensor filter is used up. Then only the filter needs to be changed, and no longer the whole NO sensor.

Data interfaces

Controlling measurements just got easier, read out, transfer and print measurement data! These data interfaces are selectable for easy communication and data transfer:  

  • Bluetooth® 2.0 (up to 100 m without obstruction)
  • USB
  • Infrared interface (Communication with the Testo printer)
  • Testo databus (up to 800m cable length) for the simultaneous operation of up to 16 analyser boxes.

To achieve the full potential of the analyser you can choose from a big selection of different flue gas sampling probes for all applications. With our software “EasyEmission” you are able to read out, edit, archive and manage the data.